Filter
Top Products
5
English
6
English
BEFORE USING THE UNIT
SETTING UP THE UNIT
Position the Unit.
Placed with angle lock lever
on right-hand side.
Position the unit so that the angle lock lever is on the right-hand
side of the user.
The massage section is contoured to
fit the shape of the calves and feet.
Use on a level surface.
Place a mat under the unit to avoid marking of floor surfaces.
Please use a mat large enough to accommodate the unit
[minimum size: 26 in. × 13 in. (66 cm × 33 cm)].
•
•
•
Connect the Power Plug to an Outlet.
Use in a safe and stable environment. •
Adjust to an Appropriate Angle for Use.
How to Adjust the Angle
Pull the angle lock lever outward, and adjust to an angle suited to use.
The angle is adjustable in eight steps.
When one of these steps is reached, you will hear a “click” indicating that it
is locked into position.
* After making adjustments, check to make sure that the massage section
is firmly locked into place.
* Take care not to pinch hands or fingers, etc. when making adjustments.
* Check to make sure the power cord and controller cord have not become
caught in or wrapped around the unit.
Angle lock lever
To use as a massager To use as a footrest
To massage the soles of the feet To massage the calves
Usage ExamplesUsage Examples
USING THE UNIT
MASSAGING LEGS AND FEET
1
Place legs or feet in the wells of the footrest.
The footrest is positioned so that the angle lock lever is on the user’s right-hand side.
Gently place legs or feet into the wells so as not to tip the unit over.
•
•
When massaging the calves When massaging the feet
• Feet are placed in the center of
the massage section.
2
Press to turn on the power.
The massage will not start until a program has been selected. •
Buttons
start flashing.
3
Select or according to the part you want
to massage.
An automatic program will start.
See Page 7 for a description of the programs.
The massage will start in Combined mode. Both massage
indicator lamps will light up.
It is also possible to change the massage mode. (See Page 7)
•
•
•
•
4
The unit will automatically stop when the massage has finished.
Operation will stop when the set program has finished. (Approx. 15 minutes)
To stop operation during a massage, press .
All operation of the unit will stop.
•
•
5-6 2007/12/19 18:05:56