Oregon BPW128 Blood Pressure Monitor User Manual


 
GB
13
SPECIFICATIONS
Measuring method : Oscillometric / non-invasive
Application : Adults
Measurement location : Wrist section of lower arm
Circumference (approx. )
5.3"-7.7"(13.5-19.5cm)
Pressure Measuring range : 30 - 280mmHg
Pulse Measuring Range : 30 - 200 pulse/min
Accuracy : (Pressure) +/- 3mmHg
(Pulse) +/- 5%
Operating environment
Operation : 50°F ... 104°F (10°C...40°C)
(10% ... 83% rel. hum.)
Storage / Transport: -4°F...158°F (-20°C... 70°C)
(10% ... 83% rel.hum.)
Power supply : 3.V DC, two (2) LR03/AAA /UM4
size batteries
Dimensions : approx. 3.1"(H)x3.0"(W)x1.3"(D)
(80mm(H)x77mm(W)x34mm(D)
Weight : 4 oz (without battery)
MAINTENANCE, CLEANING AND CARE
When handled properly, this unit is engineered to give years of
satisfactory service.
Here are a few product care instructions:
- When not in use, store the unit in the protective plastic container
provided with your purchase.
- Do not immerse the unit in water. If the unit comes in contact with
water, dry it immediately with a soft lint-free cloth.
- The unit casing and the cuff may be carefully cleaned with a soft,
slightly moistened cloth. Do not use abrasive or corrosive
cleaning agents which might damage the device.
- Remove the batteries if the device will not be used for long
periods of time.
- When replacing batteries, use new batteries as specified in this
instruction manual. Do not mix new and old batteries.
- Do not place objects on the cuff, or the main unit.
- Do not subject the unit to excessive force, shock, dust, temperature,
or humidity. Such treatment may result in malfunction, a shorter
electronic life span, damaged batteries or distorted parts.
- Do not tamper with the unit’s internal components. Doing so will
terminate the unit’s warranty and may cause damage. The unit
contains no user-serviceable parts.
- If, one day, the device should not be required for further use,
protect the environment by bringing it to your dealer or designated
collection point for proper disposal.