Filter
Top Products
5
2. Preparation
EN
2.2
Setting the Date and Time
1. Press the button.
2. Set the monitor to the correct date and time before
taking a measurement for the first time.
3. Press the O/I START button to store the setting.
Notes:
• If the batteries have been removed for 30 seconds or more, the date and time setting will need to be reset.
• If the date and time are not set, “-:--” appears during or after measurement.
1)
2)
Year
Month
Day
Hour
Minute
Push or buttons to
change.
Push the button to confirm.
Next setting appears.
HEM-7211-E_A_M_main.book Page 5 Thursday, October 7, 2010 2:51 PM