Filter
Top Products
8
3. Using the Unit
3.3
Taking a Reading
Notes:
• To cancel a measurement, press the O/I START button to turn the unit off and to release the air in the arm cuff.
• Remain still while taking a measurement.
1. Press the O/I START button.
The cuff will start to inflate automatically.
If your systolic pressure is
more than 220 mmHg
After the cuff starts to inflate, press and hold
the O/I START button until the monitor
inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
• Do not apply more pressure than necessary.
START INFLATE DEFLATE
COMPLETE
END
Dual
Check
System
Cuff Wrapping Guide
HEM-7211-E_A_M_main.book Page 8 Thursday, October 7, 2010 2:51 PM