Filter
Top Products
11
3. Using the Unit
EN
3.4
Using the Memory Function
The monitor automatically stores the result up to 90 sets. It can also calculate an
average reading based on the measurements from the last three readings taken
within 10 minutes. If there are only two readings in memory for that period, the
average will be based on two readings. If there is one reading in memory for that
period, the average will be based on one reading.
Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time, “-:--” is displayed instead of the date
and time.
To View the Average Value
1. Press the Memory button.
Note: If there are no measurements results stored in the memory, the
screen to the right is displayed.
HEM-7211-E_A_M_main.book Page 11 Thursday, October 7, 2010 2:51 PM