Filter
Top Products
How to Assemble the Main Unit
9
Before Using the Unit How to Assemble the Main Unit
How to Assemble the Main Unit
8
How to Assemble the Main UnitBefore Using the Unit
This unit must be assembled before it is used.
–Parts may fit tightly since they are made to prevent the medication from leaking.
–You must wash and disinfect all removable parts before using the unit.
Assemble the unit after washing, disinfecting, and drying.
(For how to disinfect the unit, refer to Page 18)
2 Attach the Medication Bottle to the Main Unit.
3 Attach the Mask Adapter to the Main Unit.
– If you are not going to use the unit soon after it is assembled,
disassemble the unit (as shown in the Figure to the right)
and store in the supplied Storage Case or store it in
clean environment.
(For the correct use of the unit, refer to Page 15)
Insert the
Mesh Cap
vertically.
Align both
electrodes with
each other.
Do not open the
bottle cap.
You have finished
installation.
You have finished
installation.
You have finished
assembly.
Click
You have finished
assembly.
Now you have completed assembling the Main Unit.
General Advice
• Hold the unit securely with both hands.
• Install the parts securely. (You may hear clicks depending on the parts
at the time of installation.)
1 Attach the Mesh Cap on the Medication Bottle.
Close it
securely.
You have finished
installation.
4 Attach the supplied Mouthpiece or Child’s Inhalation Mask to the Mask Adapter.
•
How to attach the Child’s Inhalation Mask • How to attach the Mouthpiece