Filter
Top Products
7
How to Assemble
A. Clean and sterilize all unit parts before the first use or after a long storage period.
B. Fill the medication cup before plugging in the unit and turning on the power.
UNIT ASSEMBLY
2. Attach the
medication cup
to the back of the
unit. Push the
medication cup
vertically until a
click is heard.
How to Fill Medication Cup
Be sure that all parts are clean before filling
medication cup. Place the prescribed medication
directly into the medication cup. Never use more
than 5 ml of solution.
3. The mesh cap is attached as follows:
A. Place the cap position indicator onto the unit
turning counterclockwise to 10 o’clock
B. Then turn the cap clockwise to 12 o’clock until a
click is heard to assure proper attachment.
4. Attached the mask or mouthpiece directly over the
mesh cap unit a click is heard. Remember to handle
the mesh cap with care to prevent breakage.
5. Attach the AC adapter plug to the "AC Adapter Jack"
for use with electrical current.The unit can also be
battery powered by using 4 "AA" batteries as
described on page 13.
1. Remove the
cover by gently
pushing in an
upward direction.