Filter
Top Products
10
3. Preparing the nebuliser for use
Warning:
Clean and disinfect the nebuliser kit, mouthpiece and nosepiece or masks
before using them for the first time after purchase, if the device has not been
used for a long period of time, or if more than one person uses the same
device.
For directions on cleaning and disinfecting refer to Section 5 (page 17-21).
Note: Make sure that the air filter is changed regularly. Refer to Section 7
“Changing the air filter” (page 23).
3.1 Connecting AC adapter
1. Make sure that the power switch is turned off.
Check that the power switch is
in the off ( ) position.
2. Inserting the power plug of the
AC adapter into the power
connector on the compressor.
3. Plug the AC adapter into a
power outlet.
Note: When disconnecting
the AC adapter, unplug
the AC adapter from
the power outlet before
removing the power
connector on the
compressor.
Power Plug
Power Connector
Power Outlet
NE-C801S-E_M_main.book Page 10 Wednesday, January 11, 2012 12:35 PM