Filter
Top Products
MX2 Basic English
5
Caution! Allow an interval of at least three minutes between two successive measurements!
1 Sit comfortably at a table with your feet
flat on the floor and rest your arm on
the table.
2 Relax your arm and turn your palm
upward.
Caution! Cuff at heart height during
measurement!
PULSE/min
DIA
mmHg
SYS
mmHg
MX2 Basic MX2 Basic MX2 Basic
PULSE/min
DIA
mmHg
SYS
mmHg
PULSE/min
DIA
mmHg
SYS
mmHg
3 Press on/off button.
Caution! Wait for zero and the heart symbol to continue!
4 Press start button
Note: the unit inflates the cuff to 170
mmHg. If required the unit
automatically increases the pressure by
40 mmHg.
Note: press and hold the start button to
set pressure higher than 170 mmHg.
Caution! Do not inflate over 280
mmHg!
PULSE/min
DIA
mmHg
SYS
mmHg
MX2 Basic
MX2 Basic 01-12 EN.qxd 10/7/08 12:19 PM Page 5