Filter
Top Products
Product name OMRON Digital Automatic Blood Pressure Monitor
Model MX2 Basic
Display Digital LCD
Measurement range Pressure: 0 - 299 mmHg / Pulse:40 - 180 / minute
Accuracy Pressure: ± 3 mmHg
Pulse: ± 5% of display reading
Inflation Automatic by electric pump
Deflation Automatic pressure release valve
Rapid pressure release Automatic exhaust valve
Pressure detection Capacitive pressure sensor
Measurement method Oscillometric method
Power supply 4 x 1.5V batteries type AA
AC adapter (optional part)
Battery life New batteries will last for approximately 300 measurements
Operating temperature/humidity +10°C to +40°C / 30% to max.85% relative humidity
Operating environment Free from excessive vibrations, shocks, magnetic fields,
electrical noise, etc.
Storage temperature/humidity -20°C to +60°C /10% to max.95% relative humidity
Weight Approximately 350 g including cuff, excluding batteries
Outer dimensions Approximately 118 mm (W) x 90 mm (H) x 130 mm (D)
Cuff dimensions Approximately 145 mm (W) x 480 mm (L)
Arm circumference 22 cm to 32 cm
Accessories Cuff, instruction manual, guarantee card, blood pressure pass
Optional parts Large cuff for arm circumferences between 32 - 42 cm, AC adapter
Note Subject to technical modification without prior notice
= Type B
Manufacturer OMRON HEALTHCARE Co., Ltd.
24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
EU-representative OMRON HEALTHCARE EUROPE B.V.
Kruisweg 577, NL-2132 NA Hoofddorp
This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive).This blood
pressure monitor is designed according to the European standard EN1060, Non-invasive
sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for
electromechanical blood pressure measuring systems.
8
MX2 Basic English
7 Technical data
compartment and insert four new identical
1.5V batteries type AA.
Spare parts
• Due to high company quality standards,
OMRON considers the main unit as a
non-serviceable part because the need
for proper calibration after replacement
of high tech components.
Attention! Disposal of batteries and the
OMRON MX2 Basic should be
carried out in accordance with
the national regulations for the
disposal of electronic products.
MX2 Basic 01-12 EN.qxd 10/7/08 12:19 PM Page 8