Filter
Top Products
2-9
Using the Handheld Infrared Thermometer
2
Table 2-1. Functional Flow Chart when the Trigger is Pulled (Real Time Mode)
Press to... to...
Press or to...
FUNC
LOCK
F
C
F
C
DISPLAY
MODE:
Press
Display shows:
Emissivity
Go to
Set Emissivity
Current temperature Lock or unlock
Distance (feet or meter)
Go to
Trigger LCK
Current temperature
Laser status
Go to
Set laser to
Current temperature Flashing or On
Maximum temperature
Go to
Press to turn on/off
Current temperature LCD backlight
Minimum temperature
Go to
Current temperature Reset Maximum, Press to change
Differential temp
Go to
Minimum, Diff.
from °F to °C or feet to meter
Current temperature
Average temps and vise versa
Average temperature
Go to
Current temperature
High alarm set point
Go to
Enable/Disable
Set High Alarm set point
Current temperature HAL
Thermocouple temp
Go to
–––––– Turn on LCD Back lite
Current temperature Change °F to °C
Low alarm set point
Go to
Enable/Disable
Set Low Alarm set point
Current temperature LAL
Ambient target temp
Go to
Enable/Disable
Set Ambient Target temp
Current temperature ATC
Data Trans. Interval
Go to
Enable/Disable
Set Data Transmission
Current Temperature PRN interval (Logging)
Memory location
Go to Store temp data –––
Current temperature
Logging
Go to
Turn on/off
–––
Current temperature Logging
Real Time Modes
NOTE: The unit of measure (°F or °C) flashes during Real Time Mode.
OS530LE, OS530HRE
OS532E
OS533E
OS534E, OS523E, OS524E