Nikon L-Ke Microscope & Magnifier User Manual


 
VARIOUS
COMBINATIONS
The Nikon Microscope Model
L-Ke is
available
in
various combinations
with
objectives, eyepieces, condensers, eyepiece tubes,
and
stages.
For ex-
ample.
Model
LBR-Ke
consists
of
Model
L
microscope stand with Koehler
illuminator
built-in base, Binocular eyepiece tube
and
Rectangular mechani-
cal stage.
Rectangular
Mechanical
Circular
Floating
Graduated,
Circular
Rotatable
Square Plain
5
1.
Interchangeable
Eyepiece
Tubes
U=Trinocular
Magnification factor
IX. Has
provision
for
diopter compensation
and
interpupillary distance adjustment from
54mm
to
74mm.
Observation
binoculars inclined 45°, photo-tube upright, 360° rotatable. With built-in
sliding
prism system, light transmission
can be
switched
over
three
ways
to
permit photomicrography through vertical tube while viewing
through binocular tube;
100%
light directed
to
observation binoculars
by switching
over
light path;
or
whole light transmission directed
to
vertical photo tube
for
photomicrography, micro-projection
or
closed-
circuit
T.V.
pickup.
T—Trinocular
Magnification factor
IX. Has
fixed beam-split ratio,
50% to
observa-
tion
binocular tubes
and 50% to
vertical photomicrographic tube.
In-
clined 45°
and
rotatable
360°.
Has
provision
for
diopter compensation.
Interpupillary distance adjustment from
54mm
to
74mm.
B
=
Binocular
Magnification factor
IX.
Inclined 45°
and
rotatable
360°.
Has
provision
for diopter compensation. Interpupillary distance adjustment from
54mm
to
74mm.
I
=
Indined Monocular
Interchangeable with other type eyepiece tubes. Inclined
45° and
rotatable
360°
2.
Interchangeable
Stages
R^Rectangular Mechanical
Stage surface
130mm
X
140mm.
Has
low-positioned coaxial
X and Y
motion
controls which provide exceptionally fine, smooth crosstravel
within
range
of
50mmx75mm.
Scales
graduated
to
0.1mm
on
vernier.
G
=
Graduated, Circular Rotatable
Stage surface
140mm
in
diameter. 360° rotatable. Goniometer divided
into
1° increments
and
reads
to 6'
with vernier. Centerable stage pro-
vided with clamping screw. Supplied with stage clips.
C^Circuiar
Floating
Stage surface
140mm
in
diameter Provided with stage clips. Accepts
attachable mechanical stage available
on
order. Moves smoothly
in
any direction within circle diameter
of
18mm
in
straight and/or rotat-
ing
motion.
Can be
clamped
in any
desired position.
P^Square
Plain
Stage surface
130mm
X
130mm.
Provided with stage clips. Accepts
attachable mechanical stage available
on
order.
-
6 -