Filter
Top Products
124
(a) "Change Screens"
Up to four auto refresh ranges can be set. Set and switch the ranges in this parameter. With different settings,
on/off data in bit devices and other data in word devices can be auto-refreshed separately.
(b) "CPU Specific Send Range"
Set the number of points in the CPU shared memory in increments of two points (two words). (If a bit device is
specified in "PLC Side Device", two points equal to 32 points.)
If the number of points is set to "0", the data of the corresponding CPU module is not refreshed.
The following number of send points can be set for each CPU module.
Set the same number of send points for all the CPU modules in the multiple CPU system. If not, "PARAMETER ERROR" will
be detected in the consistency check.
QCPU Number of send points
Basic model QCPU
• Basic model QCPU: 320 words
• Motion CPU, C Controller module, PC CPU module: 2048 words
• All CPU modules in total: 4416 points (4416 words)
High Performance model QCPU,
Process CPU,
Universal model QCPU
• Total of four ranges per CPU module: Up to 2K words
• All CPU modules in total: 8K points (8K words)