Microlife 38t0-ap Blood Pressure Monitor User Manual


 
14
7. Care and maintenance
a) Do not expose the device to either extreme
temperatures, humidity, dust or direct
sunlight.
b) The cuff contains a sensitive air-tight bubble.
Handle this cuff carefully and avoid all types
of stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not
use gas, thinners or similar solvents. Spots
on the cuff can be removed carefully with a
damp cloth and soapsuds.
The cuff must
not be washed in a dishwasher,
clothes washer, or submerged in water.
d) Handle the tube carefully. Do not pull on it.
Do not allow the tubing to kink and keep it
away from sharp edges.
e) Do not drop the monitor or treat it roughly in
any way. Avoid strong vibrations.
f)
Never open the monitor! This invalidates
the manufacturer’s warrantee.
9. Warranty
Your microlife blood pressure monitor is guaranteed for 5 years against
manufacturers’ defects for the original purchaser only, from date of purchase. The
warranty does not apply to damage caused by improper handling, accidents,
professional use, not following the operating instructions or alterations made to the
instrument by third parties.
There are no user serviceable parts inside. Batteries or damage from old batteries is
not covered by the warranty. The warranty is only valid upon presentation of the
warranty card.
Please note: According to international standards, your monitor should be checked
for calibration every 2 years.
MLUBPT0-AP-OCT04-1 copy 11/24/04 3:14 PM Page 15