Filter
Top Products
Control Solution
Testing
63
Note: If you are doing a
ß-Ketone control solution test,
KETONE will also show with
the result.
•The result is stored in your
monitor’s memory as a control
result. In your logbook, record
the result as a control result.
Shutting Off Your Monitor
1
Removing the test strip from
the strip port turns off the
monitor. You can use the
opened foil packet to
remove and discard your
used test strip.
2
Discard the test
strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the button. If you
do not turn your monitor off or
pull the test strip out, the
monitor shuts off automatically
after 60 seconds.
ART06986-Rev-B-MAN 8/22/05 11:02 AM Page 66