Filter
Top Products
Monitoring
Blood ß-Ketone
3
At the end of
the countdown:
•If the beeper is ON, listen for
the beeper.
•The blood ß-Ketone result
shows on the display window
with the word KETONE.
•The result is stored in your
monitor’s memory as a blood
ß-Ketone result. You may
also write the result in
your logbook.
Shutting Off Your Monitor
1
Removing the test strip from
the strip port turns off the
monitor. You can use the
opened foil packet to
remove and discard your
used test strip.
2
Discard the test
strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the button. If you
do not turn your monitor off or
pull the test strip out, the
monitor shuts off automatically
after 60 seconds.
51
ART06986-Rev-B-MAN 8/22/05 11:02 AM Page 54