Lumiscope 2220 Thermometer User Manual


 
12
Key Rules for Accurate Temperature Measurement
Avoid measuring body temperature within 30 minutes
after exercise, bathing, or returning from outdoors.
Allow one minute between successive measurements,
as slight variations may occur if measurements are taken
over too short a period of time.
There are no absolute body temperature standards. Keep
reliable records of your personal temperature to serve as
a reference for judging a fever.
Measurements taken are for reference only; consult a
physician before taking medical action.
Troubleshooting
1. Consistent low temperature readings
Ensure the device is being used correctly (see page 7,
“Measuring Temperature”).
The Measurement Sensor or Lens may be dirty and
require cleaning. Clean gently and thoroughly with an
alcohol swab. (see page 11, “Storage and Cleaning).
Be aware that the Non-Touch Thermometer may
register lower readings when the object or patient’s
forehead is damp, wet or perspiring.
2. Low battery warning
When battery power is too low, the device will not
operate properly. Replace the batteries as needed.
Note: Contact your authorized GF Health Products, Inc.
representative with any technical problems or queries.