Filter
Top Products
E-7
LifeSource Health Line (Toll-Free): 1-888-726-9966
In Canada (Toll-Free): 1-800-463-5414
SWITCHING THE UNIT OF MEASURE
E-6
www.LifeSourceOnline.com
TAKING YOUR TEMPERATURE
1. Make sure the lens is clean before measuring (lens can be
cleaned with an alcohol moistened cotton swab).
2. Press the SCAN button for one second.
The thermometer will power on and will
perform a self test.
3. Once the self-test is complete the
thermometer will beep, the last
measurement taken will appear on the
display. Thermometer is now ready for
measurement.
4. Press and hold the SCAN button.
Insert the thermometer tip gently into
the ear.
5. Slowly move thermometer in a circular motion for 1-2
seconds (the thermometer is performing multiple scanning
sequences within eardrum).
6. Release the SCAN button and wait for
the beep. Remove thermometer from ear
canal. The temperature is displayed.
7. To take another measurement, repeat steps 4–6. It is
recommended you wait 5 seconds between measurements.
8. The thermometer will automatically power off after one
minute of non-use.
9. Clean lens with an alcohol moistened cotton swab when
finished.
To switch between Fahrenheit and Celsius, follow these steps:
While the unit is OFF:
1. Press and release the SCAN button to turn the unit ON
2. Wait for the display to show or
3. Before the last measurement is displayed, quickly press and
release the SCAN button. You can now switch between F°
and C°
4. The thermometer is ready to use when the Ready symbol ( )
is displayed. Follow steps #4-6 on page E-6.
--F° --C°