Filter
Top Products
Setting the Alarm
The UA-789 monitor allows you to set up to three alarms per day to
notify you when to take your blood pressure. To set the alarm(s):
Press and hold the clock button until the year digits
start blinking. Then press and release the memory
button.
"P-1" will be shown at the middle of the display
screen indicating that this is the first alarm.
If you do not wish to set an alarm, press the memory button
several times to return to the main screen or allow the display to dis-
appear after 30 seconds.
2. Select the hour using the START button and press the clock button
to set the hour and move to the minute selection. After selecting
and setting the minute, press the memory button to complete the
alarm setting.
3. The display will move onto the second alarm setting and conclude
with the third alarm setting. Repeat the previous step if you need a
second or third alarm.
When the alarm is set, a "P" will appear on the main
screen. If you do not see a "P" on the main screen, press
the clock button to activate the alarm function. When
the alarm sounds, it will last for one minute. To turn
the alarm off immediately, press the START button.
To deactivate the alarm function, simply press the clock but-
ton once. You can reactivate the alarm function by pressing the clock
button again.