Filter
Top Products
19
If you hit the Registration button before listing all AC modules, or you need
to add the unlisted AC module, follow steps below.
1
Enter LGElectronics (initial password) on the blank box in figure and
press EnerBoxGroupchage button toreturn the gateway to the initial
condition. Check PLC LED. It should turn red.
2
Press the Back button. Wait for a minute and check that the PLC LED
has changed green.Then, press MAC Address List and check if the
additional AC modules have been listed.
If you can’t check the additional AC modules, connect the gateway to
another outlet near the distribution panel and search for the unlisted AC
modules.
3
Press Registration button to finish.
LGElectronics
3-1-9 Registering Additional AC Modules to the Gateway
3-1-10 Changing the EnerBox
If the EnerBox is not working correctly, follow steps below to troubleshoot.
1
After connecting a new EnerBox, enter the serial number of the failed
EnerBox on the blank and press EnerBox Group change button.
2
Compare MAC addresses listed in App and web server.
3
If matching, press Registration button to finish.
ex) 1121408000322