LG Electronics 47WV50BS Blood Glucose Meter User Manual


 
13
ENG
ENGLISH
ASSEMBLING AND PREPARING
Set 4 joined to the rest of the sets
(2 x 2 tiling)
How to Join Sets
y
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
wall mount (600 x 400).
y
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
(Each set must be firmly mounted to the wall mount plate or the wall.)
y
You may mount the set without using the tiling guide; this does not affect the performance of the
device.
y
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
components in the box, including the tiling guides.)
NOTE
1 Join other sets using screws for xing the VESA wall mount in the same way as above.
2 After joining the sets, use the tiling guide to adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.