Filter
Top Products
43
Leica M Stereomicroscopes – Illuminations
Observe the safety notes on page 7.
Observe the notes with respect to the use of the
transformer on page 38.
̈ Connect the cable between the lamp housing and the trans-
former (page 38).
̈ Switch on the transformer and use the
rotary knob to adjust the brightness.
̈ Push the condenser lens forwards
or backwards until the slider engages.
̈ Hold the lamp housing and release
the clamping screw.
̈ Align the light spot with the object.
̈ Retighten the clamping screw.
̈ Adjust the size of the light spot by
moving the condenser lens forward
or back.
̈ If necessary, swing in a filter (page 42).
Operating the lamp
Illuminating the object