Filter
Top Products
Transformers
Follow the safety instructions given on page 7.
Leica transformers may only be opened by authorized service
personnel, and the power cable must be disconnected before-
hand. The transformers are not to be used outdoors.
Regulating transformer
The regulating transformer 5.3 to 7.5 V/40 VA is used to operate
the 6 V/10 W and 6 V/20 W lamps.
1 Connections for two lamps (maximum combined
loading 40 W)
2 Connection for power cable
3 Fuse holder 2x T 1A L 250 VA
4 Power switch
Ion
0 off
5 ON display: Instrument is switched on.
6 Regulating knob
7 6 V display: The standard voltage has been reached.
Technical data see page 74
Switching the input voltage is not necessary.
The adjustment is carried out automatically by means of the
switching controller in the regulating transformer.
̈ Connect the power cable to the socket of the base and to
the power source.
̈ Connect the lamp. The sockets accept two lamps with
a maximum combined loading of 40 W.
38
Leica M Stereomicroscopes – Illuminations
Starting up
Illuminators
1
1
2
3
4
5
7
6