Filter
Top Products
Leica DM750 Manual 31
Work Surface
Always use your microscope on a hard,
stable surface.
Power Cord
If the power cord is not already atta-
ched, attach it securely to the back of
the microscope.
Setting the Illumination Intensity
Set the illumination to the lowest
setting to start with, using the control-
ler on the bottom left of the stand. The illumi-
nation control knob allows you to adjust the
intensity of light produced by the illumination
system.
Plug in and Turn on the Microscope
1. Plug the power cable of the microscope
into a corresponding grounded socket. A
grounded 3-wire cord is provided.
2. Switch on the microscope using the switch
at the bottom right of the microscope
stand.
Turning on the microscope