Filter
Top Products
Leica DM750 Manual 29
4. Push the substage condenser under the
specimen stage into the holder by alig-
ning the locating pin on the bottom of the
condenser with the slot on the rear side of
the fork.
5. Move the condenser into the highest posi-
tion by using the condenser focusing knob
on the left side of the stage mount.
6. Tighten the two setscrews using the tool
included in the delivery package (or, for a
Koehler stand, tighten the two wingscrews)
so that the upper lens of the condenser is
centered under the objective in working
position and the substage condenser is
thus roughly centered.
You will center the condenser more accu-
rately when you get to the "Complete
Condenser Centering" section on page 32.
Installing the Substage Condenser (cont.)