Filter
Top Products
Leica DM750 Manual 13
Information for the person responsible for the instrument
Information for the person responsible for
the instrument
Ϙ Ensure that the Leica DM750 microscope is
used only by qualified personnel.
Ϙ Ensure that this user manual is always
available at the Leica DM750 microscope.
Ϙ Carry out regular inspections to make
certain that the authorized users are
adhering to safety requirements.
Ϙ When instructing new users, do so
thoroughly and explain the meanings of
the warning signs and messages.
Ϙ Assign individual responsibilities for star-
ting, operating and servicing the instru-
ment and monitor the observance of these
responsibilities.
Ϙ Do not use the Leica DM750 microscope
unless it is in perfect condition.
Ϙ Inform your Leica representative or Leica
Microsystems (Schweiz) AG, Industry
Division, 9435 Heerbrugg, Switzerland,
immediately of any product defect that
could potentially cause injury or harm.
Ϙ If you use accessories made by third-party
manufacturers with the Leica DM750
microscope, be sure that each such manu-
facturer confirms the safety-engineering,
harmless usability of the product and
observe the product's user manual.
Ϙ Modifications and maintenance of the Leica
DM750 microscope may only be performed
by professionals expressly authorized by
Leica.
Ϙ Only original Leica replacement parts may
be used in servicing the product.
Ϙ After service work or technical modifica-
tions, the unit must be reconfigured with
observance to our technical requirements.
Ϙ If the unit is modified or serviced by
unauthorized persons, is improperly
maintained (as long as maintenance was
not carried out by us), or is handled impro-
perly, Leica will not accept any liability.
Ϙ The electric installation in the building
must conform to the national standard, e.g.
current-operated ground leakage protec-
tion (fault-current protection) is suggested.