Filter
Top Products
Leica DM100 User Manual 11
Information for the Person responsible for the Instrument
Information for the Person responsible for
the Instrument
Ϙ Ensure that the Leica DM100 is used only by
persons qualified to do so.
Ϙ Ensure that this User Manual is always
available at the place where the micro-
scope is in use.
Ϙ Carry out regular inspections to make
certain that the authorized users are adhe-
ring to safety requirements.
Ϙ When instructing new users, do so
thoroughly and explain the meanings of
the warning signs and messages.
Ϙ Allocate responsibilities for commissio-
ning, operation and maintenance. Monitor
compliance with this.
Ϙ Do not use the Leica DM100 unless it is in
perfect condition.
Ϙ Inform your Leica representative or Leica
Microsystems (Schweiz) AG, Industry
Division, 9435 Heerbrugg, Switzerland,
immediately of any product defect that
could potentially cause injury or harm.
Ϙ If you use accessories from other manu-
facturers with the microscope, make sure
that these manufacturers confirm that the
combination is safe to use. Follow the inst-
ructions in the User Manual for those acces-
sories.
Ϙ Modifications to or service on the micro-
scope may be carried out only by technici-
ans who are explicitly authorized by Leica
to do so.
Ϙ Only original Leica replacement parts may
be used in servicing the product.
Ϙ After service work or technical modifica-
tions, the unit must be reconfigured with
observance to our technical requirements.
Ϙ If the unit is modified or serviced by unau-
thorized persons, isimproperly maintained
(as long as maintenance was not carried
out by Leica Microsystems), or is handled
improperly, Leica Microsystems will not
accept any liability.
Ϙ The building’s electrical wiring must
comply with the relevant national stan-
dard; in other words, we recommend using
a current-operated ELCB system (RCB).