Filter
Top Products
- 6 -
KH 2113
If you wish wish to dry your hair particulary
gently, or for the so-called “air-dryed permanent
wave”, use the finger diffusor
i
.
➪ For this, first of all remove the styling jet
q
,
then replace it with the finger diffusor.
➪ Before you comb your hair out allow it to cool,
so that the styling retains its form.
➪ For cooling the hair you can use the switch
“Cool-Shot”
u
or level 1 of the blower switch
y
settings.
ƽ Attention!
First pack and transport the Professional Hair
Dryer when it has completely cooled down.
Otherwise, it could damage other items.
Cleaning
ƽ Danger of electrical shock
Before cleaning the Professional Hair Dryer,
always remove the plug from the mains wall
socket.
Cleaning the housing
➪ To clean the housing, use a soft cloth moiste-
ned with a mild soapy solution.
Cleaning the air suction grill and the
filter element
ƽ Fire hazard!
Clean the air suction grill
e
and the filter ele-
ment
w
at regular intervals with a soft brush.
➪ Fold out the air suction grill
e
to the rear.
➪ Clean the filter element
w
and the openings of
the air suction grill
e
with a soft brush.
➪ Replace the filter element
w
and close the air
suction grill
e
.
ƽ Danger of electrical shock
Before using the Professional Hair Dryer again
after cleaning, it must be completely dry.
Troubleshooting
Should your Professional Hair Dryer not function
as expected, first remove the plug from the wall
socket and allow the appliance to cool down for a
few minutes. The appliance is fitted with an overhea-
ting protector! Should the appliance still not func-
tion when cooled down, consult the service.
Disposal
Do not dispose of the appliance
in your normal domestic waste.
Dispose of the appliance through an approved
disposal centre or at your community waste facili-
ty. Observe the currently applicable regulations.
In case of doubt, please contact your waste
disposal centre.
Dispose of the packaging materials in an
environmentally responsible manner .
IB_KH2113_E266_LB6.qxd 09.08.2007 13:15 Uhr Seite 6