Kompernass KH 2113 Hair Dryer User Manual


 
- 5 -
Do not cover the air suction grill while operating
the appliance. Clean it at regular intervals.
The Professional Hair Dryer becomes hot du-
ring use. Hold it only by the grip when it is hot.
Intended Use
The Professional Hair Dryer is intended only for the
drying and shaping of human hair, under no circum-
stances is it to be used for wigs and hairpieces
made of synthetic material. You may use it exclusively
in domestic households. Pay heed to all of the in-
formation in this operating manual, especially the
safety instructions.
Delivery Contents
Professional Hair Dryer KH 2113
Styling Jet
Finger Diffusor
Operating manual
Description of the appli-
ance
q
Styling Jet
w
Filter element
e
Air suction grill
r
Suspension lug
t
Blower level switch (2 levels)
y
Heat level switch (3 levels)
u
Cool level switch (“Cool-Shot”)
i
Finger Diffusor
Operation
Insert the plug into the wall socket.
Switch the Professional Hair Dryer on with the
blower level switch
t
.
The Professional Hair Dryer is fitted with two
function switches. With these you can separately
select the strength of the air flow (Blower switch
t
)
and the amount of heat (Heat level switch
y
):
Blower levels
0 The Professional Hair Dryer is
switched off
1 reduced air flow
2 full power air flow
Heat levels
1 Cold air flow
2 Low heating level
3 High heating level
With the cool level switch “Cool-Shot”
u
you can
produce a cooler air flow with every combination
of blower and heat levels.
Switch the appliance off after use, in that you
place the blower switch
t
into position “0”.
Then remove the plug from the wall socket.
Drying and styling hair
To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Afterwards, place the settings at
a lower level to shape and form the hair.
With the enclosed styling jet
q
, which can be
turned into all positions, you can use the air flow
directly for styling.
KH2113
IB_KH2113_E266_LB6.qxd 09.08.2007 13:15 Uhr Seite 5