MOTOR/PUMP
115 VAC
3450 RPM/10 AMP
60 Hz
Single Phase
DIMENSIONS
60" (1524 mm) L
60" (1524 mm) W
20" ( 508 mm) H
PRODUCT
WEIGHT
122 lb
(55.4 kg)
WHIRLPOOL
BATH
R
OPERATING
GALLONAGE
78 U.S. gal
(295.4 liters)
TOTAL
WEIGHT
1022 lb
(464.5kg)
ELECTRICAL
REQUIREMENTS
115 VAC
15 AMP
60 Hz
Requires Dedicated
Separate Circuit
SHIPPING
WEIGHT
152 lb
(69.1 kg)
Use installation instructions provided with product. Product specifications are subject to change without notice.
SPECIFICATIONS
Verona
™
Whirlpool Bath
INSTALLATION INSTRUCTIONS
Important: When fitting a tower enclosure to the J-Corner Shower Tower, an opposite hand tower enclosure
must be ordered. That is, a left hand tower fits onto a right hand whirlpool bath. Conversely a right hand tower
fits onto a left hand whirlpool bath.
Each whirlpool bath is shipped completely equipped with skirt, motor/pump assembly, plumbing and fittings
necessary for whirlpool operation, and ready for installation. An optional drain/overflow kit is available for installation
on the bath.
Optional Features
• Shower Tower Enclosure
• Drain/Overflow Kit
• Timer
• Pillow
Use liquid detergent to maintain bright, smooth surface.
Do not use abrasive household cleaners.
Do not use oil based bath additives.
2
"
END VIEW
60"
1" FLANGE
63''
85
20"
83"
FRONT VIEW
(Right Hand Whirpool Bath Shown )
OUTLINE OF AN
OPTIONAL LEFT HAND
SHOWER TOWER
ENCLOSURE
20.5"
Standard Features
• Four Fully Adjustable PowerPro
®
Jets
• Three Directionally Adjustable Jets
• Magic Touch
®
ON/OFF Switch
• Silent Air Induction System
• Removable Skirt