Invacare 300 Mobility Aid User Manual


 
SECTION 7—SEAT
Zoom
300 and Zoom
400 38 Part No. 1118395
NOTE: The seat locks in position at 90° intervals. The seat is locked when an audible “click” is
heard.
3. Rotate the seat to the desired position.
4. Release seat lever to lock seat in desired position.
NOTE: Ensure that the seat is locked in position before operating the scooter.
FIGURE 7.4 - 90° SEAT SWIVEL ADJUSTMENT
REMOVING/INSTALLING SEAT POSITIONING
STRAP
ƽ WARNING
ALWAYS wear your seat positioning strap.
The seat positioning strap is a positioning belt ONLY. It is not designed for use as a
safety device withstanding high stress loads such as auto or aircraft safety belts. If
signs of wear appear, belt must be replaced immediately.
NOTE: For this procedure, refer to FIGURE 7.5.
1. Remove the two (2) mounting screws and washers that secure the seat positioning
straps to the arm frame.
2. Remove the two (2) halves of the seat positioning strap from the arm frame.
3. Reposition the two (2) new seat positioning strap halves underneath arm frame.
4. Reinstall the two (2) mounting screws and washers that secure the seat positioning
straps to the arm frame. Securely tighten.
Seat
Seat
TOP VIEW VIEW FROM BACK