Filter
Top Products
26
27
The back brace helps you to keep the backrest upholste-
ry tight to offer the maximum back support to the user.
Note : When the back brace is in place the chair cannot
be folded.
Use : To detach the back brace, loosen knob A, lift up the
back brace, gently pull it towards you and lower it below
the push handles.
To attach the back brace put it in its original position and tighten knob A checking that
it is firmly fixed.
8.17 Comfort headrest
(photo 35)
An adjustable in height and angle headrest which is fixed to the back brace.
To adjust the height of the headrest, loosen the handle A, slide the headrest into the
wanted position and retighten handle A, making shure the headrest is firmly fixed.
To adjust the angle or position of the headrest, loosen the handles B move the hea-
drest into the position wanted and retighten the handles.
Warning : We recommend that you - check that the back brace is firmly fixed
- check all handles are locked tight
- do not adjust the headrest while someone is using it
- orientate the handles so that cannot hurt the user or the attendant
8.18 Dual handrims
This system enables the user to propel the wheelchair using only one arm by the
use of 2 handrims on one of the wheels (available on both the right and left hand-
side).
To learn how to use these two systems, you must consult your dealer.