Filter
Top Products
22
23
8.6 Footrests
(Photos 14 and 15)
- Use : The footrests have thepossibility to be
swung to the exterior and to the interior of the
chair.
To take off the footrests, you simply pull them
upwards. To replace the footrests gently place
the tube A into the support B and aling the
footrests with the frame so that they lock into
place.
Warning :
- Do not lift the chair by any of the range of
footrest/legrest/amputee supports.
- Check that the footrests are fixed correctly
before placing your feet on the footplates.
8.7 Legrests
(Photos 16 and 17)
The legrests are footrests that can be angle
adjusted and also incorporate an adjustable
cushion to support the leg.
- Use : To remove, replace and turn the legrests
follow the instructions for the foorests.
- Adjustment :
To adjust the angle of the legrests, loosen the
handle A and lift or lower the legrest tube until you have the correct angle and
retighten the handle.
To adjust the height of the cushion D loosen the
knob C, slide the cushion into the wanted position
and retighten the knob C.
8.8 Footplates (Photo 20)
Footplates consist of a support tube and a footplate
to be used only to support the foot of the user when
seated in the wheelchair.