Filter
Top Products
GB (TrueTrack) Non-Heavy Duty Motors and Hardware
For MKIV Electronics Only
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when
the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not
available with the Torque SP (301-351 TQHD) user weight selection until 1/26/04 when the user weight
limit was raised to 400 Lbs.
Item #1b Warranty/Refurbished Motor - Date Application Reference Chart
NOTE: Part #'s 1153335E, 1153336E, 1153648E, 1153649E are currently not available. Refer to part #'s
1123235E Right or 1123234E Left as replacements. Additional hardware is not required. Motors include a
Controller Gasket Connector Kit and instruction sheets.
Model Number and
Side
Before 2/6/03
2/6/03-1/25/04 and
(2/6/03-3/14/04 For VA
Gov't Orders)
1/26/04-5/21/07 and
(3/15/04-5/21/07 For VA
Gov't Orders)
1123235EN/AN/A-Right (Refurbished)
1153335E
11155091115509-Right (Refurbished)
See Note(s) E, C, A2, A, A1
1153648E
N/AN/A
-Right (Refurbished) w/
Wheel Lock
See Note(s) E, A2, B, B1
1123234EN/AN/A-Left (Refurbished)
1153336E
11155091115509-Left (Refurbished)
See Note(s) E, A, A1, A2, D
1153649E
N/AN/A
-Left (Refurbished) w/
Wheel Lock
See Note(s) E, B1, A2, B
A - Part #'s 1153335/6 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller Motor Gasket
Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and
A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector was
introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
A2 - A Refurbished Motor is used for a warranty replacement
B - Part #'s 1153648/9 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor Gasket
Connector kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with
Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
E - Part #'s 1153335E, 1153336E, 1153648E, 1153649E are currently not available. Refer to part #'s 1123235E Right or 1123234E
Left as replacements. Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets.
NOTE:
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when the TTHD GB motors covered all
Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (301-351 TQHD) user weight selection until
1/26/04 when the user weight limit was raised to 400 Lbs.
161
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
00-191