Filter
Top Products
Motor/Gearbox Assembly Reference Chart
MKIV Electronics (4-Pole Before 10/9/06) & (GB Before 5/22/07)
A - Part #'s 1153335/6 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller Gasket
Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and
A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector was
introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
B - Part #'s 1153648/9 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Gasket Connector
kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with
Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
NOTE:
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when the TTHD GB motors covered all
Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (301-351 TQHD) user weight selection until
1/26/04 when the user weight limit was raised to 400 Lbs.
136
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
00-191