Filter
Top Products
Motor/Gearbox Assembly Reference Chart
For MK6i Electronics (4-Pole After 10/8/06) & (GB After 5/21/07)
New - GB Heavy Duty (HD) TrueTrack Motors
Model and
Side
Part Number
Storm Arrow (Std.) (300 Lb. & 400 Lb. Weight Limits)Storm Arrow
1153335
-Right
See Note(s) A1, A
1153648
-Right w/ Wheel Lock
See Note(s) B1, B
1153336
-Left
See Note(s) A1, A
1153649
-Left w/ Wheel Lock
See Note(s) B1, B
Storm RX (Optional) (400 Lb. Weight Limit)Storm RX
1153335
-Right
See Note(s) A1, A
1153648
-Right w/ Wheel Lock
See Note(s) B1, B
1153336
-Left
See Note(s) A1, A
1153649
-Left w/ Wheel Lock
See Note(s) B1, B
(Optional) (300 Lb. Weight Limit)Torque SP/SE
1153335
-Right
See Note(s) A1, A
1153648
-Right w/ Wheel Lock
See Note(s) B1, B
1153336
-Left
See Note(s) A1, A
1153649
-Left w/ Wheel Lock
See Note(s) B1, B
(Optional) (300 Lb. Weight Limit)Torque 3
1153335
-Right
See Note(s) A1, A
1153336
-Left
See Note(s) A1, A
A - Part #'s 1153335/6 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller Motor Gasket
Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and
A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector was
introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
B - Part #'s 1153648/9 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor Gasket
Connector kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with
Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
NOTE:
141
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
00-191