Invacare Top End ForceTM Mobility Aid User Manual


 
SECTION 2—SAFETY AND HANDLING
Part No 1114850 17 Recumbent Handcycle Series
NOTE:Duringindependenttransfer,littleornoseatplatformwillbebeneathyou.Althoughit
maybedifficulttowedgethetransferboardbetweenthehandcycleseatandthehandcycleseat,use
atransferboardifnecessary.
NOTE:RefertoSTEPSAFinFIGURE 2.1fordetailsregardingtransferto/fromahandcycle.
6. Shiftbodyweightontoobjectwhiletransferring.
7. Liftandplaceleftlegpastfrontframeacrossseatandovercentertube.
FIGURE 2.1 Transferring Into/Out of the Handcycle
STEP A: Shift body weight to the edge of the
wheelchair upholstery closest to the handcycle.
ƽ WARNING
If installed, parking brake
MUST be secured.
STEP B: Lift and
place LEFT leg past
front frame across
seat and over
center tube.
STEP C: Place LEFT hand on the left
side of handcycle seat frame, NOT on
hand crank.
STEP D: Place RIGHT
hand on the
wheelchair frame.
STEP F: Place both legs onto
handcycle footrests and secure
safety straps.
STEP E: Lift and shift weight
down into handcycle seat.
ƽ WARNING
Wheel locks MUST be
engaged if installed.
Handcycle Pedals
(positioned toward
the front of the
handcycle).
Footrest
Seat Frame
*NOTE:ThestepsinFIGURE1arespecificallyfortransferto/fromawheelchairandDONOT
correspondtothestepsintheprocedureonthepreviouspage.Followasimilarprocedureto
transferto/fromanobjectotherthanawheelchair.Refertothestepsonthepreviouspagefor
moreinformation.
NOTE:Handcycleshownforclarity.
H
a
n
d
c
y
c
l
e
W
h
e
e
l
c
h
a
i
r