Filter
Top Products
10 BATTERIES
Invacare® Lynx™ L-3 & Invacare® Lynx™ L-4 Scooters
38 Part No. 1143205
10.2 Removing/Installing the Battery Box
Removing
1. Turn power off and remove the key from the ignition.
2. Remove the seat. Refer to Removing/Installing the Seat
on page 23.
3. With one hand, push the release lever to the rear of the scooter.
4. With the other hand, hold the battery box handle and lift the battery box up and away from the scooter (Detail “A”).
Installing
1. Turn power off and remove the key from the ignition.
2. Remove the seat. Refer to Removing/Installing the Seat
on page 23.
3. Holding the battery box handle, carefully lower the battery box on to the battery tray in the scooter (Detail “B”).
4. Press down the battery box to engage the connector on the battery box (not shown) with the connector on the scooter base (Detail “B”).
5. Reinstall the seat. Refer to Removing/Installing the Seat
on page 23.
For this procedure, refer to FIGURE10.2 on page 39.
The battery box is held in place with hook and loop strips.