Filter
Top Products
8 TILLER ADJUSTMENT
Part No. 1143205
33 Invacare® Lynx™ L-3 & Invacare® Lynx™ L-4 Scooters
8 Tiller Adjustment
8.1 Adjusting the Tiller Angle
1. Rotate or pull out the tiller adjustment lever (Detail “A”) until the
pin disengages from the mounting hole.
2. Move the tiller to the desired position.
3. Release or rotate the tiller adjustment lever to lock the pin into the
desired mounting hole (Detail “A”).
4. Gently push/pull against tiller to ensure that the tiller is securely
locked.
FIGURE 8.1 Adjusting the Tiller Angle
ƽ
WARNING
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustments and before use, the tiller MUST be securely locked into position. Otherwise, a fall
from the scooter could occur causing bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure
that the tiller is securely engaged into the adjustment plate.
For this procedure, refer to FIGURE 8.1.
The powered scooters feature an adjustable tiller.
The tiller locks into one of three positions. The
tiller can also be folded down for transportation
and storage.
Tiller Adjustment Lever
Tiller Assembly
DETAIL “A”
Mounting Hole
Pin