Filter
Top Products
Part No. 1056953 27 9000 Series
SECTION 3
FRONT RIGGINGS
FRONT RIGGINGS
RAISING/LOWERING THE ELEVATING LEGREST
ASSEMBLY (FIGURE 5)
WARNING
Ensure hands and fingers are clear of elevating legrest mechanism BE-
FORE pushing release lever to lower the elevating legrest. Otherwise
injury may occur due to pinch points.
The wheelchair users leg MUST be supported by an assistant BEFORE
attempting to lower legrest.
1. To raise the elevating legrest, the assistant should grab hold of the support tube and
raise elevating legrests until the desired height is obtained.
2. To lower the elevating legrest, perform the following:
A. Support user leg with one (1) hand.
B. Push release lever downward with other hand.
C. Gently, lower user leg down and rest against the legrest.
FIGURE 5 - ADJUSTING THE ELEVATING LEGREST ASSEMBLY
Support Tube
Release Lever