Filter
Top Products
Part No. 1118394 31 Rehab Shower Commode Chair
ADJUSTING THE WHEEL LOCKS (FIGURE 2)
1. Loosen the two (2) socket screws that secure the wheel lock assembly to the Rehab
Shower Commode chair frame.
NOTE: Any wheel lock adjustment should embed the wheel lock shoe at least 3/16-inch into the
tire when engaged.
2. Adjust the position of wheel lock until the 3/16-inch measurement is obtained for
correct wheel lock adjustment (FIGURE 2).
3. Securely tighten the two (2) socket screws.
4. Engage the wheel lock and push against the Rehab Shower Commode chair and
determine if the wheel lock engages the wheel lock shoe enough to hold the Rehab
Shower Commode chair.
5. Repeat the above sections until the wheel lock holds the Rehab Shower Commode chair.
6. Repeat section for opposite wheel lock
WHEEL LOCKS
SECTION 11WHEEL LOCKS
Wheel lock shoe
embedded into rear
wheel tire at least
3/16-inch
FIGURE 2 - ADJUSTING WHEEL LOCK
Wheel Lock Handle