Rehab Shower Commode Chair 24 Part No. 1118394
FRONT RIGGINGS
FRONT RIGGINGSSECTION 7
REPLACING HEEL LOOPS (FIGURE 3)
1. Note the position of hex bolt, coved washers and locknut for reinstallation.
2. Remove the hex bolt, coved washers and locknut that secure the lower footrest to
the footrest support.
3. Remove the lower footrest.
4. Remove the phillips bolt, spacer and locknut that secure the existing heel loop to
the lower footrest.
5. Slide the existing heel loop off the lower footrest.
6. Replace heel loop.
7. Reverse STEPS 1-6 to reassemble.
NOTE: When securing heel loop to lower footrest, tighten the phillips screw and locknut until the
spacer is secure.
FIGURE 3 - REPLACING HEEL LOOPS
Phillips Bolts
Lower Footrest
Locknuts
Heel Loop