Support User Manuals

Invacare 1143199 Mobility Aid User Manual

Open as PDF

of 48

SECTION 2—INSTALLING

Part No 1143199 9 InTouch

™

Propel

™

Back

SECTION 2—INSTALLING

ƽWARNING

Check ALL fasteners periodically to ensure that mechanical connections and

attaching hardware are tightened securely - otherwise injury or damage may occur.

DO NOT continue to use this product if problems are discovered. Corrective

maintenance can be performed at or arranged through your equipment supplier.

The Propel Back is not designed for use with tilt-in-space and/or recline model

wheelchairs.

Installation Overview

NOTE:Forthisprocedure,refertoFIGURE2.1.

1. Removeanyexistingbackupholsteryorbacksystemfromthechairbefore

installation.RefertoOwner’sManualshippedwithwheelchair.

2. Installmountinghardware.RefertoInstallingMountingHardwareonpage 9.

3. InstallPropelBackontothewheelchair.RefertoInstalling/RemovingthePropelBack

onpage 11.

4. Makeanynecessarydepthand/orangleadjustments.RefertoAdjustingthePropel

BackDepthandAngleonpage 14andAdjustingthePropelBackWidthonpage 12.

FIGURE 2.1 Installation Overview

Installing Mounting Hardware

NOTE:Forthisprocedure,refertoFIGURE2.2onpage10.

NOTE:Canebracketsadjusttofit7/8”to1”backcanes.Noadditionalhardwareisrequired.

1. Positionthecanemountingbracketontothebackcaneatthedesiredheight.

STEP 2

STEP 3

STEP 4

previous next