Inova CTPT-6LPZ Oxygen Equipment User Manual


 
SmartDose Liquid Oxygen Portable Overview
The illustrations show the parts of the SmartDose Liquid Oxygen Portable.
Cleaning and Maintenance
Removing Frost
Under certain environmental conditions, frost may form on the vaporizer
coil and on the case. As the unit thaws, the possibility exists for melted
frost to leak from the bottom of the unit. You can remove it by wiping
the case with a cloth. Exercise caution when placing the unit on valu-
able, water sensitive surfaces.
Cleaning and Maintenance
There are no user-serviceable components inside the LOX
portable. Contact your medical equipment provider in the event that
your SmartDose unit requires service.
Keep the exterior of the SmartDose Liquid Oxygen Portable clean using
a clean, damp, oil-free, lint-free cloth.
Clean and dry the coupler on the SmartDose Liquid Oxygen
Portable with a clean, dry, oil-free, lint-free cloth before each portable
ll.
Cleaning and Maintenance
Chad Therapeutics recommends using only cannula specically intended
to be used with oxygen delivery systems.
Cannula should be capable of delivering up to 10 LPM of
continuous ow; maximum length that can be used is 7 feet. Contact
your medical equipment provider for recommendations and details.
Refer to the cannula manufacturer’s instructions for proper cleaning and
maintenance procedures.
178
LOX Fill Coupler
Dose Indicator Lights
CF (Continuous Flow/SmartDose) Switch
(Pull out for Continuous Flow only.)
Fill Valve
Batteries
(2AA cells)
Battery
Indicator
Light
Activation Button
(also used to adjust settings)
Oxygen
Outlet
Connector