Filter
Top Products
17
Connecting a telephone to the base
Connect the telephone cable connector to the
socket marked with the symbol EXT LINE.
0
All options are not available for the Ingenico 7780 model.
Connecting to a peripheral
Switch the base off and connect the peripheral
cable to the base on the RS232 input/output
marked COM2 or COM3.
Connecting to the electric network
Connect the power supply unit connector to the
socket marked with the symbol
and the
power supply unit to the electric network.
L A green light, located on the front right hand side of the base,
indicates if the power is on.
L A cable securing plate supplied with the terminal
keeps the cables in place.
Cable securing plate
Telephone line extension [TNV-3**]
Serial links [SELV*]
Power supply [SELV*]