HoMedics BPW-260 Blood Pressure Monitor User Manual


 
1211
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady during
measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Error Determining Measurement Data: Measure
again.
If any of the following letters and numbers appear in the
area that systolic pressure should be displayed, an error
has occurred with your reading. See Troubleshooting
section of this manual for more information.
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator
Pulse
Rate
User 1: Appears when the monitor is operated by User 1
User 2: Appears when the monitor is operated by User 2
Weak Battery Symbol: Appears when batteries should
be replaced
Pulse Symbol: Shows the pulse rate per minute
Irregular Heartbeat Detector: Refer to page 27 for more
information.
Memory Average: Displays average of last 3 readings
Risk Category Index: See page 26 for more information.
Talking Feature On Symbol: Appears when talking
function is activated. (Speaker ON)
Display Symbols:
BPW-260_A.indd 11-12BPW-260_A.indd 11-12 12/7/09 4:48 PM12/7/09 4:48 PM