Filter
Top Products
15 16
1.Ifthecuffisnotassembled,passtheendofthe
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side without
the felt material should be on the inside of the cuff loop.
2. Plug the cuff tube into the left side of the unit.
3. Open the arm cuff so that your arm may be placed
through it.
4.Removetightfittingclothingfromyourupperleftarmso
that the cuff can be wrapped around your exposed arm.
5.Positioncuffedge0.8-1.2
inches (2-3cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
8.Lay your arm on a table (palm upward) so the
cuff is at the same height as your heart. Make
sure the tube is not kinked.
ARROW MUST FALL
WITHIN YELLOW BAND
D-ring
End of cuff
2~3 cm
(0.8”~1.2”)
Position cuff edge
0.8
–
1.2 inches (2
–
3cm)
abov
e elbow.
Fit cuff
Allow
to fi
and
Cen
mi
Insert plug here