Filter
Top Products
Installing the Outer Guard Panel
Step 1
Remove the hexbolts on the ends of the
platform. Insert the guard panel posts into
the pockets in the platform. The smooth side
of the guard panel should face in towards the
center of the platform.
If you have a 90 degree exit platform, install
the end guard panel using the provided
bracket and bolt to inner guard panel.
Step 2
Install the platform control box on the rear
guard panel using screws and nuts through
the panel.
Step 3
Plug in the harness for the platform control
box. Secure the harnesses under the clip on
top of the carriage flange.
7