Filter
Top Products
Page 7SKU 93033 For technical questions, please call 1-800-444-3353.
When ordering parts from this list, add the suffix “a” to the number.
Jack (36) Parts List A
Part No. Description Qty. Part No. Description Qty.
1a Ram Cap 1 21a Spring 1
2a Ram 0-ring 1 22a Screw 1
3a Top Sealing Gasket 2 23a 0-ring 1
4a Ram Assembly 1 24a Screw 1
5a Ram Gasket 1 25a Ball 3
6a 0-ring 1 26a Spring Plunger 1
7a Cylinder 1 27a Spring 1
8a Lower Sealing Gasket 1 28a Screw 1
9a Oil Reservoir 1 29a Washer 1
10a Oil Filler Plug 1 30a Screw 1
11a Pedal Release Valve 1 31a Lower Sealing Gasket 1
12a Pin 1 32a Washer 1
13a Release Valve Rod 1 33a Lower Spring Retainer 1
14a 0-ring 1 34a Pump Cylinder 1
15a Release Valve Pin 1 35a 0-ring 1
16a Base 1 36a Seal 1
17a Split Cotter Pin 4 37a Piston Rod 1
18a Pin 3 38a Link 1
19a Steel Ball 1 39a Handle Socket 1
20a Spring Plunger 1 40a Top Spring Retainer 1
41a Spring 1
Bleeding and filling the Jack with hydraulic oil.
1. Place the Lift on a flat, level, solid surface.
2. If just filling the Jack, open the Oil Filler Plug (10a) and check the oil. Fill to the top of the
Oil Reservoir (9a) with a high quality hydraulic oil if necessary.
3. If bleeding, with the Oil Filler Plug (10a) removed, use one foot to step on and keep the
Release Pedal (26) down, while you quickly pump the Foot Pedal (24) ten times. This will
bring all the air out of the system. Continue pumping until no more air bubbles appear. Fill to the
top of the Oil Reservoir (9a) with a high quality hydraulic oil if necessary. Repeat if necessary.
4. Replace the Oil Filler Plug (10a) .
5. Test the Jack. Make sure it is functioning properly before attempting to lift another load.
Pump the Foot Pedal (24) up and down several times, and test the Release Pedal (26) to
make sure it is working properly; if not, repeat the above process. If the lift continues to func-
tion improperly, have a qualified service technician check the product.
Maintenance (continued)