Filter
Top Products
Page 3SKU 98059 For technical questions, please call 1-800-444-3353.
use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f. If operating the Scale in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
a GFCI reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating the Scale. Do
not use the Scale while you are tired or under
the inuence of drugs, alcohol or medication.
A moment of inattention while operating the
Scale may result in serious personal injury.
b. Use safety equipment. Always wear
eye protection. Safety equipment
such as ANSI-approved safety impact
goggles will reduce personal injuries.
c. Prevent unintentional starting. Ensure the
Power Switch (11) is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying
battery operated equipment with your nger on
the Power Switch or energizing equipment that
have the Power Switch on invites accidents.
d. Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the Scale in unexpected situations.
4. Scale use and care
a. Do not force the Scale. Use the correct
Scale for your application. The correct
Scale will do the job better and safer at
the rate for which it was designed.
b. Do not use the Scale if the Power Switch (11)
does not turn it on and off. Any equipment
that cannot be controlled with the Power
Switch is dangerous and must be repaired.
c. Disconnect the AC/DC Adapter Cord
before making any adjustments, changing
accessories, or storing the Scale. Such
preventive safety measures reduce the risk
of starting the equipment accidentally.
d. Store idle battery powered equipment
out of the reach of children and do not
allow persons unfamiliar with the Scale
or these instructions to operate the
equipment. Battery powered equipment are
dangerous in the hands of untrained users.
e. Maintain the Scale. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the Scale’s
operation. If damaged, have the Scale repaired
before use. Many accidents are caused by poorly
maintained battery operated power equipment.
f. Use the Scale in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use
of the Scale for operations different from those
intended could result in a hazardous situation.
5. Battery tool use and care
a. Recharge only with the AC/DC Adapter (25)
specied by the manufacturer. An Adapter that
is suitable for one type of Battery may create a
risk of re when used with another Battery Pack.
b. Use this Scale only with specically
designated Batteries. Use of any other
Battery may create a risk of injury and re.
c. When the Battery (21) is not in use, keep it
away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the Battery
Terminals together may cause burns or a re.
d. Under abusive conditions, liquid may be
ejected from the Battery (21). If contact with
liquid from the battery accidentally occurs,
ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected
from the Battery may cause irritation or burns.
6. Service
a. Have your Scale serviced by a qualied
repair person using only identical
replacement parts. This will ensure that
the safety of the equipment is maintained.
Specic Safety Warnings
1. Maintain labels and nameplates on the tool.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
2. This Scale contains a sealed lead Battery. Do not
dispose of an old Battery in re to avoid explosion
and possible personal injury. Recycle old batteries
according to local solid waste authority procedures.
3. Do not exceed the Scale’s maximum
weight capacity of 33 pounds.
4. Avoid unintentional starting. Prepare to
begin work before turning on the Scale.
5. Do not leave the Scale unattended when it’s AC/
DC Adapter is plugged into an electrical outlet.
Turn off the equipment, and unplug the AC/DC
Adapter from its electrical outlet before leaving.
6. The AC/DC Adapter gets hot during
use. The Adapter’s heat can build up
to unsafe levels and create a re
hazard if it does not receive adequate
ventilation, due to an electrical fault,
or if it is used in a hot environment.
Do not place the Adapter on a ammable surface.
Especially avoid placing the Adapter on carpets
and rugs; they are not only ammable, but they